POLYMERS AND PLASTIC USE FOR THE HEAT-EXCHANGE EQUIPMENT (REVIEW)

  • I.O. Mikulionok National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Kyiv
Keywords: heat-exchange apparatus, polymer, plastic, classification, design

Abstract

The possibility of use of the heat-exchangers in whole or in part manufactured with use of polymers and plastics is considered. Despite obvious, at first sight, inexpediency of use of polymeric materials in the heat-exchange equipment (low coefficient of heat conductivity, and also low, in comparison with metals, the strength properties of the majority of the most widespread polymers), «polymeric» heat-exchangers find application in various areas of the industry more and more surely. Classification of heat-exchange apparatuses which constructive elements are executed with use of polymeric materials is proposed. The following signs are the basis for classification: polymer type, a type of polymer meric material, type of the heat-exchange apparatus (a form of heat-exchange elements), reliance on polymeric materials in apparatuses, motion freedom of polymeric heat-exchange elements, level of assembly of a design, and also diameter of tubular elements. Critical analysis the most characteristic designs developed by domestic and foreign designers and inventors is carried out. Ref. 21, Fig. 13.

Downloads

Download data is not yet available.

Author Biography

I.O. Mikulionok, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Kyiv

Doctor of Technical Sciences

References

Spravochnik po teploobmennikam (1987) [Reference book on heat exchangers]. Ed. B.S.Petukhov, V.K.Shikov. Moscow : Energoatomizdat, 912 p. (Rus.)

Timonin A.S. Osnovy konstruirovaniya i raschyeta khimiko-tekhnologicheskogo i prirodookhrannogo oborudovaniya (2002) [Bases of designing and calculation of the chemical and technological and nature protection equipment]. Kaluga : N.Bochkaryovoy Publishing House, 2848 p. (Rus.)

Kornienko Ya.M., Lukach Yu.Yu., Mikulionok I.O., Rakytskyi V.L., Riabtsev G.L. (2011). Protsessy ta obladnannia khimichnoi tekhnologii [Processes and equipment of chemical technology]. Kyiv: NTUU «KPI», 716 p. (Ukr.)

Mikulionok I.O. (2014). Mekhanichni, hidrome- khanichni i masoobminni protsessy ta obladnannia khimichnoi tekhnologii [Mechanical, hydromecha- nical and mass-exchanged processes and equipment of chemical technology]. Kyiv : NTUU «KPI», 340 p. (Ukr.)

Shah R.K. (2006). Advances in Science and Technology of Compact Heat Exchangers. Heat Transfer Engineering, 27 (5), pp. 3–12. doi: 10.1080/ 01457630600559462.

Mikulionok I.O. (2010). Vyhotovlennia, montazh ta ekspluatatziia obladnannia khimichnykh vyrob- nytztv [Production, installation and operation of the equipment of chemical productions]. Kyiv : NTUU «KPI», 412 p. (Ukr.)

Zaheed L., Jachuck R.J.J. (2004). Review of polymer compact heat exchangers, with special emphasis on a polymer film unit. Applied Thermal Engineering, 24 (16), pp. 2323–2358. doi:10.1016/j. applther- maleng.2004.03.018.

Mikulionok I.O. (2019). Classification of tube-in-tube heat-transfer devices (Survey of Patents). Chemical and Petroleum Engineering, 55 (7–8), pp. 601–607. doi: 10.1007/s10556-019-00667-w.

Bar-Cohen A., Rodgers P., Cevallos J.G. (2008). Application of thermally enhanced thermoplastics to seawater-cooled liquid-liquid heat exchanger. 5th European Thermal-Sciences Conference (18–22 may 2008). The Netherlands, Eindhoven. 12 p. — http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.456.2756&rep =rep1&type=pdf

Mikulionok I.O. (2011). Pretreatment of Recycled Polymer Raw Material. Russian Journal of Applied Chemistry, 83 (6), pp. 1105–1113. doi: 10.1134/ S1070427211060371

Mikulionok I.O. (2017). Tekhnolohichni osnovy pereroblennia polimernykh materialiv [Technological bases of processing of polymeric materials]. Kyiv : Politekhnika, 324 p. (Ukr.)

Fizicheskie velichiny : Spravochnik. (1991). [Physical Quantities : Reference Book]. Ed. I.S.Grigorev, E.Z.Meylikhov. Moscow : Energoatomizdat, 1232 p. (Rus.)

Chung D.D.L. (2010). Composite Materials : Science and Applications. London : Springler Verlag London Limited, 349 p.

Mikulionok I.O. (2012). Klassifikatziya termoplasticheskikh kompozitzionnykh materialov i ikh napolniteley [Classification of thermoplastic composite materials and their fillers]. Plasticheskie massy, 9, pp. 29–38. (Rus.)

Mikulenok I.O. (2013). Determining the thermophysical properties of thermoplastic composite materials. International Polymer Science and Technology, 40 (9), pp. 23–28.

Mikulionok I.O. (2019). Use of Polymer Materials in Heat Exchangers (Review of Patents). Chemical and Petroleum Engineering, 55 (7–8), pp. 687–695. doi: 10.1007/s10556-019-00680-z.

Voznyuk V.T., Karvatskii A.Ya., Mikulenok I.O. (2013). Investigation of the Cooling of Two-Layer Corrugated Polymeric Pipes. Journal of Engineering Physics and Thermophysics, 86 (3), pp. 505–510. doi: 10.1007/s10891-013-0861-8.

Mikulyonok I.O. (2013). Equipment for preparing and continuous molding of thermoplastic composites. Chemical and Petroleum Engineering, 48 (11–12), pp. 658–661. doi: 10.1007/s10556- 013-9676-x

Mikulionok I.O. (2015). Classification of Processes and Equipment for Manufacture of Continuous Products from Thermoplastic Materials. Chemical and Petroleum Engineering, 51 (1–2), pp. 14–19. doi: 10.1007/s10556-015-9990-6.

Mikulionok I.O. (2019). Removable Vortex Generators of Pressurized Tubular Channels with Round Cross-Section (Classification and Survey of Patents). Chemical and Petroleum Engineering, 54 (11–12), pp. 842–848. doi: 10.1007/s10556-019-00560-6.

Mikulionok I.O. (2019). Classification of Means of Enhancement of Heat Transfer from the Outer Surface of Pipes (Survey of Patents). Chemical and Petroleum Engineering, 55 (5–6), pp. 491–499. doi: 10.1007/s10556-019-00651-4.

Published
2020-03-20
How to Cite
Mikulionok, I. (2020). POLYMERS AND PLASTIC USE FOR THE HEAT-EXCHANGE EQUIPMENT (REVIEW). Energy Technologies & Resource Saving, (1), 59-71. https://doi.org/10.33070/etars.1.2020.8
Section
Equipment and devices

Most read articles by the same author(s)

1 2 > >>