REACTOR’S THERMOPHYSICAL CHARACTERISTICS WITH AN ELECTROTHERMAL FLUIDIZED BED AND A COMBINED HEATING METHOD

  • K.V. Simeiko The Gas Institute of National Academy of Scienses of Ukraine, Kyiv
  • M.A. Sidorenko The Gas Institute of National Academy of Scienses of Ukraine, Kyiv
Keywords: electrothermal fluidized bed, pyrocarbon, silicon carbide, heat balance, similarity criteria

Abstract

To improve the technological features and efficiency of high-temperature processing of the dielectric materials, a reactor design with the electrothermal fluidized bed with a combined heating method was developed at the Institute of Gas of the National Academy of Sciences of Ukraine. The main purpose of this reactor is the process of applying a pyrocarbon coating to quartz sand. The principle-technological scheme of the process is given. Subsequently, quartz sand coated with pyrolytic carbon will be used to produce pure silicon carbide. The authors developed a methodology for calculating the heat balance, which allows estimating the efficiency of the reactor. A method for calculating similarity criteria was chosen for the possibility of comparing the efficiency of heat exchange in a developed reactor with other machines for thermochemical processes. A description of the heat exchange between the fluidized bed and the electrode is proposed. After further experiments, it willbe possible to make final conclusions regarding improving the technological features andincreasing the efficiency of the process of applying a pyrolytic coating to quartz sand, andalso to check the adequacy of the calculation methods. After further experiments, it will bepossible to make final conclusions about improving the technological features and increasing the efficiency of the process of applying a pyrolytic coating to quartz sand. Also, it will allow to check the adequacy of the calculation methods. Bibl. 17, Fig. 2.

Author Biographies

K.V. Simeiko, The Gas Institute of National Academy of Scienses of Ukraine, Kyiv

Candidate of Teсhnical Sciences

M.A. Sidorenko, The Gas Institute of National Academy of Scienses of Ukraine, Kyiv

PhD Student

References

Gupta C. K. and Sathiyamoorthy D. Fluid Bed Technologyin Materials Processing. New York: CRCPress LLC, 1999. 512 p.

Borodulya V.A Vysokotemperaturnye processy v jelektrotermicheskom kipjashhem sloe [High-temperatureprocesses in the electrothermal fluidized bed.]. Minsk: Nauka i tehnika [Science and Technology],1973. 176 p. (Rus.)

Malinovskij A.I., Rabinovich O.S., Borodulja V.A.,Greben‘kov A.Zh., Sidorovich A.M. Lokal‘naja provodimost‘ kipjashhego sloja, sostojashhaja iz jelektroprovodjashhih chastic [Local conductivity ofthe fluidized bed, consisting of electrically conductiveparticles]. Inzhenerno-fizicheskij zhurnal [Engineering and Physics Journal], 2012, Vol. 85, № 2. P. 239–245. (Rus.)

Makhorin K.E., Karp I.M., Kozhan A.P. Vysokotemperaturnaja pech‘ s jelektrotermicheskim kipjashhem sloem dlja nagreva vodoroda [High temperature furnace with electrothermal fluidized bed for hydrogen heating], Informacionnoe pis’mo instituta gaza AN USSR [Information Letter of Gas Institute of Academy of Sciences of Ukrainian Soviet Socialist Republic]. Kiev : Naukova Dumka,1970, No. 15, 32 p. (Rus.)

Pat. 4543240 A USA, B 01 J 12/00, Fluidized beds, silicon carbide production. Patent holder: No. 06/691,076; applic. date: 14.01.1985; publ. date: 24.09.1985.

Borodulya V.A., Vinogradov L.M., Grebenkov A.G.,Mikhailov A.A., Rabinovich O.S. Sintez melkozernistogo karbida kremnija metodom karbotermicheskogo vosstanovlenija kremnezjoma v jelektrotermicheskom kipjashhem sloe [Synthesis of fine silicon carbide by carbothermal reduction of silica in the electrothermal fluidized bed]. Kniga tezisov., IX Mezhdunarodnaja konferencija «Kremnij-2012» [IX International Conference «Silicon-2012». Book of abstracts.]. St.-Petersburg, 2012, 280 p. (Rus.)

Bogomolov V.O., Kozhan A.P., Bondarenko B.I., Khovavko O.I., Simeiko K.V. Kapsulirovanie kvarcevogo peska pirouglerodom v jelektrotermicheskom psevdoozhizhennom sloe [Research of theprocess of quartz sand encapsulation by pyrolytic carbon]. Energotehnologii i Resursozberezhenie [Energy Technologies and Resource Saving]. 2013,№ 5. p. 36–40. (Rus.)

Gubynskyi M.V., Barsukov I. V., Fedorov S.S., Livitan M. V., Gogotsi O.G., Upendra S. Rohatgi Study of aerodynamic properties of continuous hightemperature reactors. Conference ASME 2013 Fluids Engineering Division Summer Meeting, InclineVillage, N.Y. July 2013. 7 p.

Simeiko K. Thermal influence of microdischarge plasma on the process of receiving of quartz sand encapsulated by pyrocarbon. Proccedings of the National Aviation University. 2014, No. 2, pp.131–135.

Latukhina N., Chepurnov V., Pisarenko G. Kremniy i karbid kremniya. Novyye tekhnologii [Silicon and silicon carbide. New technologies]. 2013. 4. pp. 104–110. (Rus.)

Karbid kremniya: tekhnologiya, svoystva, primeneniya [Silicon carbide: technology, properties, applications]. Ed. A.E. Belyaeva, R.V. Konakova. Kharkov: ISMA, 2010. 532 p. (Rus.)

Simeiko K.V. Ispolzovanie elektrotermicheskogo psevdoozhizhenogo sloya v kachestve vneshnego nagrevatelnogo elementa reaktora [Efficiency of electrothermal fluidized bed applying as the outer heatingelement of reactor]. Energotehnologii i Resursozberezhenie [Energy Technologies and ResourceSaving]. 2015, No. 1. pp. 58–64. (Rus.)

Pat. 117157 Ukraine, B 01 J 8/18 (2006.01), B 01 J8/42 (2006.01), B 01 J 19/14 (2006.01), C 01 B33/021(2006.01), C 01 B 33/021 (2006.01), C 30 B25/10(2006.01), C 30 B 28/14 (2006.01), C 30 B31/12 (2006.01). Reaktor dlja visokotemperaturnih procesіv u psevdozrіdzhenomu sharі [The reactor for high temperature processes in fluidized bed] / K.V. Sіmeiko, B.І. Bondarenko, O.P. Kozhan, V.M. Dmіtrіev; Applicant and patent holder: Gas Instituteof National Academy of Sciences of Ukraine. № a201506499; publ. date: 26.06.2017, Bull. No. 12. (Ukr.)

Mahorin K.E., Pikashov V.S., Kuchin G.P. Teploobmen v vysokotemperaturnom kipjashhem sloe. [Heat transfer in a high-temperature fluidized bed]. Kyiv : Naukova Dumka, 1981. 148 p.

Davydov V.I., Gamrekeli M.N., Dobrygin P.G. Termicheskie processy i apparaty dlja poluchenija okislov redkih i radioaktivnyh metallov [Thermal processes and apparatus for the production of oxides of rare and radioactive metals]. Moscow : Atomizdat, 1977, 208 p.

Mahorin K.E., Tishhenko A.T. Vysokotemperaturnye ustanovki s kipjashhim sloem [High-temperature installations with fluidized bed]. Kyiv. Tehnika [Technique], 1966. 194 p.

Baskakov A.P., Berg B.V., Ryzhkov A.F., Filippovskij N.F. Processy teplo- i massoperenosa v kipjashhem sloe [Processes of heat and mass transfering the fluidized bed]. Moscow: Metallurgija. 1978. 248 p.

Published
2018-09-14
How to Cite
Simeiko, K., & Sidorenko, M. (2018). REACTOR’S THERMOPHYSICAL CHARACTERISTICS WITH AN ELECTROTHERMAL FLUIDIZED BED AND A COMBINED HEATING METHOD. Energy Technologies & Resource Saving, (3), 59-66. https://doi.org/10.33070/etars.3.2018.07
Section
Equipment and devices